Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused). FS - SM Fuzz £239 - Morley Loop Corrector - FX £ Discussions on The Fretboard
›
UNPLANNED DOWNTIME: 12th Oct 23:45

FS - SM Fuzz £239 - Morley Loop Corrector

What's Hot
HoraceBHoraceB Frets: 326
edited May 2022 in FX £
SM Fuzz - £239 posted

Super fuzz that cleans up really well, if I'm honest it's only the side knobs that put me off.

https://i.imgur.com/olqz8jD.jpg
https://i.imgur.com/naYjwjh.jpg
https://i.imgur.com/5a4nnle.jpg
https://i.imgur.com/wipXCp4.jpg


Morley Effects Loop Corrector £50 Posted

A very useful tool, hardly used, I originally got it for my Matchless Lightning which I sold, currently using a Friedman which has an excellent FX loop so this in now surplus to requirements

Some info taken from the web:
Matching up a full board of pedals and integrating them in the FX loop of your amp may cause some problems when a mix of weak and strong signals have to co-exist in the same signal chain. But don’t worry! Your solution is right here. Let our Effects Loop Corrector fix it.
Key Features:
  • Get It Right – Corrects weak or strong effect loops signals (send & return).
  • Correct your Signal Voltage – Custom step up/down transformer.
  • Balanced & Unbalanced – Connect unbalanced mono cables (TS tip/sleeve) and balanced stereo cables (TRS tip/ring/sleeve) in any combination.
  • Eliminate Grounding Hum or Buzz – Internal ground reference switch.
  • Built to Last – Road-worthy, cold-rolled steel housing.
  • Dimensions – 4.75″ (L) / 3.5″ (W) / 2.63″ (H)
  • Current Draw – N/A (passive)
POWER REQUIREMENTS: The Effects Loop Corrector is a passive device (does not need a battery or power adapter).
 CONNECTION NOTES: Typically, standard mono guitar cables (TS - Tip/Sleeve) are used with this device. When using stereo effects in an Effects Loop that accepts stereo cables (TRS - Tip/Ring/Sleeve), the Effects Loop Corrector will also accept stereo connectors. WHAT IS AN
EFFECTS LOOP (FX LOOP)? An Effects Loop consists of SEND and RETURN jacks typically found on the back panel of many guitar amplifiers. An Effects Loop is used to hook up effect(s) so the player can plug directly into the amp input for the strongest guitar signal and uninterrupted tone from both the guitar and the effect(s).
WHY MIGHT I NEED TO CORRECT MY FX LOOPS SIGNAL? The actual level of effects loops signal varies from amp to amp. Correcting the FX Loop signal will provide a proper signal for the effects and result in better overall tonality.
WHEN EFFECT LOOP LEVEL IS TOO HOT: Some Effects Loop signals are too hot and will cause effects to distort - follow Set Up Diagrams #1 or #2 to solve this.
WHEN EFFECTS LOOP SIGNAL IS TOO WEAK: Some Effects Loop signals are too weak and lack the presence and headroom for a full pleasing tone - Follow Set Up Diagrams #3 or #4 to solve this.

https://i.imgur.com/8H0N3gB.jpg
https://i.imgur.com/k4tEk3y.jpg
https://i.imgur.com/7kqPiWo.jpg
https://i.imgur.com/qBVFXRX.jpg

UAFX Golden Reverb: £265 posted SOLD

Strymon DIG - £175 SOLD

Boss SY-200 - £265 posted SOLD

UAFX Astra Modulation Pedal - £259 SOLD

Carbon Copy Deluxe  £149 SOLD

Harmonius Monk  £160 posted SOLD

Kingtone Heavyhand  £225 Withdrawn

Chase Tone Secret Preamp  £125 posted SOLD 

Boss DD-200  £155 posted SOLD

King Tone Heavy Hand - £215 posted SOLD
Feedback thread    https://www.thefretboard.co.uk/discussion/57738/
0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter

Comments

Sign In or Register to comment.