Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused). SOLD Push-push pots 500K audio taper (new, unused) - Parts £ Discussions on The Fretboard
› ›
UNPLANNED DOWNTIME: 12th Oct 23:45

SOLD Push-push pots 500K audio taper (new, unused)

What's Hot
goldtopgoldtop Frets: 5625
edited September 2020 in Parts £
Just found these while sorting things out and I've had them for ages. The guitar project I bought them for is long gone!

I think they are the Allparts version. Marked "WSC A500K". They look exactly like the ones shown here: https://www.thomann.de/gb/allparts_pushpush_poti_500k.htm

£10 each (I have 4) and shipping within UK at £2 each.

0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter

Comments

  • goldtopgoldtop Frets: 5625
    A photo:


    Also: proceeds to the tFB forum fund.
    0reaction image LOL 1reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • kipplekipple Frets: 339
    edited September 2020
    goldtop said:
    Just found these while sorting things out and I've had them for ages. The guitar project I bought them for is long gone!

    I think they are the Allparts version. Marked "WSC A500K". They look exactly like the ones shown here: https://www.thomann.de/gb/allparts_pushpush_poti_500k.htm

    £10 each (I have 4) and shipping within UK at £2 each.

    I'm wondering was the project by any chance an ESP George Lynch Kamikaze ? or maybe to build something like the Kami


    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • roman_subroman_sub Frets: 18
    Any chance of measuring their resistance between the two outer lugs?
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • goldtopgoldtop Frets: 5625
    @kipple - I had a Kamikaze, but these were bought for a LP that I decided to keep vintage-ish.

    @roman_sub - I'll check next week, when I'm back at work.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • robinbowesrobinbowes Frets: 2922
    Can you measure depth from the shoulder at the base of the thread to the bottom of the switch? Also, the depth of the thread?

    Thanks!

    R.
    Good quality cables available here

    Eqd Speaker Cranker clone
    Monte Allums TR-2 Plus mod kit

    Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • goldtopgoldtop Frets: 5625
    Resistances measured: 443k/455k/495k/515k

    The total length of the threaded bush is 10mm and with BOTH nuts fitted, there's approx 5mm spare (i.e. for the scratchplate or guitar wood thickness.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • robinbowesrobinbowes Frets: 2922
    goldtop said:
    Resistances measured: 443k/455k/495k/515k

    The total length of the threaded bush is 10mm and with BOTH nuts fitted, there's approx 5mm spare (i.e. for the scratchplate or guitar wood thickness.
    Thanks - how about the depth from the base of the thread to the bottom of the switch? I'm looking at fitting them to a thinnish guitar with a shallow body.

    R.
    Good quality cables available here

    Eqd Speaker Cranker clone
    Monte Allums TR-2 Plus mod kit

    Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • goldtopgoldtop Frets: 5625
    The 515k/495k pots are now sold. Two pots remaining.

    I will get the extra measurement tomorrow.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • goldtopgoldtop Frets: 5625
    robinbowes said:
    goldtop said:
    Resistances measured: 443k/455k/495k/515k

    The total length of the threaded bush is 10mm and with BOTH nuts fitted, there's approx 5mm spare (i.e. for the scratchplate or guitar wood thickness.
    Thanks - how about the depth from the base of the thread to the bottom of the switch? I'm looking at fitting them to a thinnish guitar with a shallow body.

    R.

    As best as I can measure that measurement is 28mm (perhaps 29mm required for clearance).
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • robinbowesrobinbowes Frets: 2922
    goldtop said:
    robinbowes said:
    goldtop said:
    Resistances measured: 443k/455k/495k/515k

    The total length of the threaded bush is 10mm and with BOTH nuts fitted, there's approx 5mm spare (i.e. for the scratchplate or guitar wood thickness.
    Thanks - how about the depth from the base of the thread to the bottom of the switch? I'm looking at fitting them to a thinnish guitar with a shallow body.

    R.

    As best as I can measure that measurement is 28mm (perhaps 29mm required for clearance).
    Thanks - I'll take the two remaining pots. I shall DM my address, and you can reply with payment details.

    Cheers,

    R.
    Good quality cables available here

    Eqd Speaker Cranker clone
    Monte Allums TR-2 Plus mod kit

    Trading feedback: http://www.thefretboard.co.uk/discussion/60602/
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
Sign In or Register to comment.