Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused). 12s or 13s on your Dreadnought acoustic? - Acoustics Discussions on The Fretboard
UNPLANNED DOWNTIME: 12th Oct 23:45

12s or 13s on your Dreadnought acoustic?

What's Hot
Which gauge for the win?


0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
«1

Comments

  • ToneControlToneControl Frets: 11438
    11
    1reaction image LOL 0reaction image Wow! 1reaction image Wisdom · Share on Twitter
  • I use either:
    11s, which are loads easier to play than:
    12s, which sound better.

    Many dreads come strung with 13s which I imagine brings out the best sounds, but it depends if you are wanting to do dreadnoughty strumming or get busy with lead lines. I've never tried them and have no interest in doing so TBH.
    I'm just a Maserati in a world of Kias.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • tone1tone1 Frets: 4930
    11's for me :)
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • 11s? big girls blouses!


    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom · Share on Twitter
  • bluechargeboybluechargeboy Frets: 1887
    edited November 2016
    Sorry to tell you this but all acoustic players are big girls' blouses; there are no subdivisions within that. :P
    I'm just a Maserati in a world of Kias.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • ICBMICBM Frets: 69426
    12s at the moment - it's a big heavy guitar even by Dreadnought standards and I felt 11s sounded a little thin - although the biggest problem is that most sets of 11s come with a 22 G, which is noticeably too light and thin-sounding - it needs to be a 23, which oddly a set of 10s normally comes with! I've never quite understood that.

    My ideal gauge might actually by 11/12 hybrids - 12s, but with the 11 and 15 plain strings.

    "Take these three items, some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone." - Walt Kowalski

    "Just because I don't care, doesn't mean I don't understand." - Homer Simpson

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • I am trialling 11s at the moment; they surely sound thinner but the needs of the performance outweigh the tone IMO (Martin Retro monel strings use a 23 G by the way).
    I'm just a Maserati in a world of Kias.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • LewyLewy Frets: 3795
    .013s, but with quite a low action and a very straight neck.

    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom · Share on Twitter
  • LewyLewy Frets: 3795
     bluechargeboy said:

    the needs of the performance outweigh the tone IMO


    There's a lot to that. A lot of people fetishise tone over actually playing well....not limited to acoustic (or guitar for that matter). 


    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom · Share on Twitter
  • davewwdaveww Frets: 165
    11 to 50 Newtone masterclass
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • 12-53 D'Addarios but tuned D-D. Really suits a dreadnought and sounds huge but solos are easier to play. I get loads of compliments from punters at my solo acoustic gigs.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • AliGorieAliGorie Frets: 308
    Which gauge for the win?
    not sure what u's question is RF, the type of guitar is not all that relevant - u's playing style is.
    presuming it's a standard Dread - spruce 'n something with a 25.4 scale length it depends what type of tension u like to work with / against.
    Grassers usually like more resistance for the h'ons and p'offs they do also there's 'that sound' they get from playing behind the soundhole so 13's are widely used. They also acoustically have to compete with banjo, mandolin and fiddle so need the 'punch' of that extra tension.
    I play a deep body'd OM, in tuning and use 13's - never in standard.
    Do u use tuning's ?
    and so on

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • 13s - though I use a lot of dropped tunings.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • BigMonkaBigMonka Frets: 1732
    12s ftw 
    Always be yourself! Unless you can be Batman, in which case always be Batman.
    My boss told me "dress for the job you want, not the job you have"... now I'm sat in a disciplinary meeting dressed as Batman.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • 13-56 for me. I've always had 12s on my other acoustic, so I don't think 12s on a dread would sound too bad really.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • RandallFlaggRandallFlagg Frets: 13679
    edited November 2016
    AliGorie said:
    Which gauge for the win?
    not sure what u's question is RF, the type of guitar is not all that relevant - u's playing style is.
    presuming it's a standard Dread - spruce 'n something with a 25.4 scale length it depends what type of tension u like to work with / against.
    Grassers usually like more resistance for the h'ons and p'offs they do also there's 'that sound' they get from playing behind the soundhole so 13's are widely used. They also acoustically have to compete with banjo, mandolin and fiddle so need the 'punch' of that extra tension.
    I play a deep body'd OM, in tuning and use 13's - never in standard.
    Do u use tuning's ?
    and so on

    Bashing out Pinball Wizard or Going Mobile in your best Pete Townsend style...what else is there?

    I'm kidding, but the reason I like a Dread is to be able to play hard like Pete Townsend but also have a guitar that can sound OK for Neil Young type picking such as Needle and The Damage Done. I'm no finger style virtuoso.

    My D28 can sound a little restrained with 12s, but I prefer the more balanced tone when compared to a HD28 (which is all bass and treble and seems hollow in the mids), I'm toying with going to 13s, and it's been a long while since I tried them and at £17 a pop for a set of coated long life strings and with a couple of sets of 12s in the drawer, I can wait!

    When did strings get to £17 a go? jeez. 


    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • LewyLewy Frets: 3795
    I think a standard D28 benefits from .013s definitely. With setup there's no reason for that to be a struggle, especially for the sort of stuff you're looking to play.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • sweepysweepy Frets: 4005
    13's for DADGAD and other turnings , 12's for standard
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • I use 12s on my Sigma 000, I think any more tension would be dark too much for any sort of lead playing. 
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • A few years ago after a bout of RSI I had to drop to 10's, then to 11's and I'm now back to 12's. I think 12's are the ideal, you can get away with 13's on standard braced guitars, but I'd avoid on scalloped bracing. Obviously, all this is based on using standard tuning, lower tunings would probably dictate heavier strings.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • crunchmancrunchman Frets: 10961
    It does depend on the guitar.  Get something responsive that's not over braced and you don't need stupidly heavy strings.  Get a modern D28 and you do need heavy strings to get the top moving.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • 12s on my Santa Cruz;  my Larrivee TSB SD50 sounds amazing with 13s but find 12s easier to play and that's what I usually put on it
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • AliGorieAliGorie Frets: 308

    When did strings get to £17 a go? jeez. 
    'r u talking about
    Thomastik-Infeld strings ?.
    their 'Spectrum's' are quite possibly the best strings made, in materials and manufacture (for acoustic guitar).
    Superb, of course they wont suite everyone or every guitar but the amount of expertise involved is beyond what we've come to expect from the £5 a set US brands.
    The layer of silk between the core and wrap wire really works to neutralizing that 'metallic clang'  ya get with the likes of D'Addario's on a  decent quality acoustic.
    £17 ? tax deductibles to a pro-musician might be the answer


    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • Tell you what, after every 2 hours acoustic practice on a Wednesday with just 11s, and after having gotten the action lowered, I still find my plucking hand sore. I'm half tempted to go back to the trusty Little Martin guitars which I found a breeze to play.. but clearly sounds nothing like my Larrivee. Damn it!
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • Tell you what, after every 2 hours acoustic practice on a Wednesday with just 11s, and after having gotten the action lowered, I still find my plucking hand sore. I'm half tempted to go back to the trusty Little Martin guitars which I found a breeze to play.. but clearly sounds nothing like my Larrivee. Damn it!
    I'm pretty sure that the Little Martin has a 23 inch scale and the Larrivee is most likely 650mm/25.5 inches, so there is a big difference re string tension. It might be worth having a look at the neck relief on the Larrivee as an adjustment might make things a bit easier or alternatively try a Gibson J45 which has a 630mm scale length.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • LewyLewy Frets: 3795
    Tell you what, after every 2 hours acoustic practice on a Wednesday with just 11s, and after having gotten the action lowered, I still find my plucking hand sore. I'm half tempted to go back to the trusty Little Martin guitars which I found a breeze to play.. but clearly sounds nothing like my Larrivee. Damn it!
    Sore where...fingertips? How are you picking the strings....flesh, nail, both etc?

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • It's like a day-long throbbing pain along my tendons :o
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • AliGorie said:

    When did strings get to £17 a go? jeez. 
    'r u talking about
    Thomastik-Infeld strings ?.
    their 'Spectrum's' are quite possibly the best strings made, in materials and manufacture (for acoustic guitar).
    Superb, of course they wont suite everyone or every guitar but the amount of expertise involved is beyond what we've come to expect from the £5 a set US brands.
    The layer of silk between the core and wrap wire really works to neutralizing that 'metallic clang'  ya get with the likes of D'Addario's on a  decent quality acoustic.
    £17 ? tax deductibles to a pro-musician might be the answer


    No, Martin or Elixir coated long life strings:

    http://www.stringsdirect.co.uk/strings-c1/acoustic-guitar-strings-sets-c33/martin-lifespan-msp7200-phosphor-bronze-acoustic-guitar-strings-13-56-medium-p444





    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • crunchmancrunchman Frets: 10961
    The coated strings have always been about 3 times the price of normal strings.  If they last 3 times as long you are fine.  If they don't then buy normal strings - unless you are lazy and don't want to change them as often.
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • AliGorieAliGorie Frets: 308
    ah, see what ya mean Randy, something I never consider - ‘coated’ as quality non coated las me 1 to two years - so no need thankfully, as I can hear the effect the coating has on the sound + the typical quality of materials is VERY average alloys in coated strings.
    Your paying for a slightly longer lasting string - the coating - but your also paying for reduced sales a company would incur - either way, they got ya if you sweat acid, your gonna have to live with average sounding, strange feeling expensive consumables.
    On that point - has anyone tried DR Dragon Skins - which I believe are their ‘Rares’ with a coating of which I’m a fan.
    0reaction image LOL 0reaction image Wow! 1reaction image Wisdom · Share on Twitter
Sign In or Register to comment.