Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused).
It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
For £300 it isn't going to be a vintage Gibson L5, or as tonally inspiring as a Benedetto.
Stick a pickup on it and it'll feedback, which might be what you want
Feedback
just because you do, doesn't mean you should.
Feedback
just because you do, doesn't mean you should.
You need to transfer the string tension forces on the top of the guitar away from the bridge out to the rim where it is stongest. Otherwise in an archtop with a floating bridge it will "sink" the top over time, all archtops, even laminates will have at least neck to tail bracing to "support" the bridge, my Gibson 175 and 125 do. With carved pine tops some go further and use forms of scalloped X bracing to "tune" the top.
In flat tops, the plate under the bridge/top is attached to the bracing achieving the same purpose and stops (or at least slows down!) the bridge lifting the top.
http://img834.imageshack.us/img834/5941/pfz1.jpg
http://img707.imageshack.us/img707/1696/ygas.jpg
Shite pics I know, but we all know what they look like. It's actually rather good. It felt very stiff for the first hour or so, almost like the component parts didn't know they were meant to be a guitar yet, but it seems to be bedding in nicely. It's very light and responsive to playing dynamics, but doesn't feel physically fragile if that's not too much of a contradiction.
It has a couple of the faults I've read about, ie, you can just about see that there's no paint under the end of the fingerboard (shrugs), and it does have one slightly proud fret which only became apparent when I lowered the action to silly electric guitar levels just to see what choked first. I'll try tapping it in gently, but if it's already seated properly I'll just give the frets a very mild levelling.
The strings are D'addario Phosphor bronze, and sound really vile with this guitar, harsh, with very brassy overtones. It mellows a little when you realise how loud the guitar is, and that you can back off with your picking hand a fair bit. The strings suit fingerpicking better than flatpicking atm, but I'll throw a set of light Gypst Jazz strings on and see what happens.
Much is made of the pronounced V neck profile on these. I totally forgot about it when I was playing it, only remembering how defined it is when carrying it about by the neck. One deviation from Gibson convention is the shallow angled scarf-jointed headstock, which is very welcome on a round-the-house beater guitar.
The top IS braced, with just a couple of braces from neck to tail as expected. Tonewise it has a pretty authentic pre-war kind of sound covering early solo jazz type stuff and the weird Hawaiian-type stuff I tend to dabble in, as well as the obvious brash jazz rhythm pounding you'd expect from it. It really is a genuine acoustic instrument, whereas rivals like the Godin are just not loud enough and seem like an afterthought from their electric archtop range.
TBH, I've always hated folk flat tops, I just can't stand their plinky prettiness, this is definitely an ideal acoustic for a Les Paul lover, both the guitar and the player.
Overall I reckon it's an absolute steal for 300 notes.
It's hard to quantify value for money with these tbh, I'm not sure you can get a carved archtop for less than a grand or so anywhere else. A lot of reviewers complain about detail faults on these, but quite frankly if they put in the time necessary to iron those out then I'm sure I could no longer afford it.
just because you do, doesn't mean you should.
I'm just generalising obviously, but delicate-sounding it ain't, and its nice to be able to hear single note lead lines when playing with other acoustic guitarists
just because you do, doesn't mean you should.
Feedback