Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused). SOLD: Gigrig G3 & Alder Ash pedal Board; full wiring - FX £ Discussions on The Fretboard
›
UNPLANNED DOWNTIME: 12th Oct 23:45

SOLD: Gigrig G3 & Alder Ash pedal Board; full wiring

SquareheadedfreakSquareheadedfreak Frets: 306
edited February 2023 in FX £

Bit of hesitant sale this one, as my pride and joy, but need to move some stuff on and ultimately know I'll never use this outside of the bedroom as a pedal testing, so looking to restart and rebuild something smaller, as this is stadium worthy, not 'headphones in a bedroom whilst 3 years sleeping worthy...'

Realistically I want to sell as a package, collected & tested from WS12 Hednesford, or I can hand deliver in most of England/Wales for a .40p each way mileage fee, as its bloody heavy!

I may consider splitting in future, but ideally don't want to for now for the bulk, unless an exceptional offer is made (prices below)

Gigrig G3 - This is boxed, Comes with the Generator and also the Bank Manager. These are on a 3 month back order and £1100/£39 for G3/BM RRP

Alder & Ash Pedal board - 28x16', Tailor pro, in Black tolex & grey Vox Cloth case, with walnut wood. Upgraded to inbuilt power/switch + 4 I/o and internal leads x 2 = £550 RRP with 3 month build time + hard cover case in same trim

Cabling - All handmade, soldered with silver solder. Using Van Damme Pro grade cabling, with Squareplug SPS4BK  jacks on gigrig end, to Neutrik pancakes on other end, around £20 to buy each, but I made them for around £10 in parts

Cables: 31 in total inc I/o, close to £600 worth to buy. I made them for around £300 in parts and 10 hours labour (well worth it however!) Shrink wrapped labels for each end were £60 alone on top, but make life so much easier when routing around as labelled for each one on each end

will throw in a load of cable ties/more routing tabs

10 x pairs labelled up FX 1-10 send/return 1 x spare pair unlabelled
1 tuner
1 amp out
1 bank manager
2 others that run from Noise suppressor loop and back

Cable tie management everywhere, good quality pedalboard tape added on top and internally.


As part of sale, happy to create some labels for pedals/power bank for new owner.


All in all, Think I pumped around £2400 into the build and a lot of time. Happy to keep all routing/cable ties, or can break down

Looking for £1400. To include all of the above.  (No pedals included in sale aside from switcher)


(To Split up the above I'd want:
Gigrig G3 + generator/bank manager £900 posted
Alder & Ash Pedalboard - £400 collected
Cabling all made & labelled x 31 £200




image0.jpeg 151.2K
image6.jpeg 168K
image4.jpeg 158K
image2.jpeg 156.8K
image5.jpeg 177.4K
image3.jpeg 158.8K
image1.jpeg 184.8K
image7.jpeg 185.7K
image9.jpeg 108.8K
image8.jpeg 168.6K
image10.jpeg 162.8K
image11.jpeg 173.9K
image12.jpeg 140K
image13.jpeg 168.3K
0reaction image LOL 12reaction image Wow! 0reaction image Wisdom · Share on Twitter

Comments

Sign In or Register to comment.