FS, Most of a nice Strat (GSP, GuitarBuild, Pribora, Wilkinson) + Ibanez-ish neck

DrBob · July 2022

In a rare moment of clarity I’ve realised that I’ve actually moved house with some of these parts twice so it’s safe to say they’re not getting used anytime soon and I could really do with raising funds to buy a bike to get out and actually do some exercise so let’s see if we can get this stuff somewhere where it will actually get used

Beginning with most of a nice Strat Project;

1. GSP Basses Strat neck (SOLD)

Nice bit of wood here, we all know Graham makes lovely lovely things

https://i.imgur.com/aZnwfDy.jpg

https://i.imgur.com/dtkuffu.jpg

Rosewood board over maple neck with what feels like some sort of oil/wipe on finish on the back of the neck

stats are

22 frets (I’m saying med/jumbo) have been used but good nick

https://i.imgur.com/nDM3IHA.jpg

Fingerboard Rad looks to be 9.5-10” ish

Nut width 42.6mm
Heel width , interestingly the fingerboard is actually 57mm wide but the maple heel has been taken down to fit a standard Fender 55.56mm

Depth at 1st fret 22.2mm
Depth at 12th fret 24.5mm

it’s a nice rounded “C” profile, bit chunkier than a Fender medium C but not massive

It fits the GuitarBuild body below perfectly

Its been previously fitted for Klusons, will come with the bushings fitted, little notch out just behind the nut slot and a a few little dings around the headstock perimeter

https://i.imgur.com/jCDT6BA.jpg

https://i.imgur.com/1Egeuws.jpg

Its a really nice solid neck from the hands of the mighty Graham

Any extra pics or detail please shout

£90 posted

2. Guitar Build Strat Body w/ Tort Plate

https://i.imgur.com/1RkLa0l.jpg

https://imgur.com/gallery/K1GgyGH

Right so nice, medium/light weight Strat body which I believe is from GuitaBuild, it’s been finished in Oly white but without grain filler so the grain pops through

https://i.imgur.com/JCwIjXh.jpg

https://i.imgur.com/Ak3DgVR.jpg

https://i.imgur.com/g0CiISZ.jpg

Looks great, bit different and really works with the included Tort plate

https://i.imgur.com/xMoTwqY.jpg

£85 posted

3.Pribora “Red & White” Strat Pickups (SOLD)

Handwoud by Alexander Pribora out in Russia, and I believe he pots them in wax from his fathers bees… Never installed cables never cut. Boutique quality for sub Tonerider money !

https://i.imgur.com/g0CiISZ.jpg

https://i.imgur.com/sZEZvh2.jpg

There’s few different demos of these on YT but here’s one from the man himself

https://youtu.be/_ufXBUDZLrg

£50 posted ?

4. Wilkinson WVP6 SB Strat trem

https://i.imgur.com/Ic5GzE0.jpg

Yep it’s the one with the 5 elongated holes & the one round hole allowing you to fit it to either 54 or 56mm spaced screw holes

Its got the real deal Steel trem block with staggered string holes

Its got the push fit trem arm plus tension adjustment

Its got the full set of claw, claw screws, springs & mounting screws

£20 posted

5. Ibanez-ish neck (needs frets & finishing)

Details on this are a bit hazy, not trying to mislead I promise just as I said, I’ve had some of this stuff kicking about for years so I’ve forgotten quite a lot of what I was told when buying this stuff ..

Its deffo not real Ibanez

https://i.imgur.com/gWu28Tb.jpg

Multi lam 24 fret I neck with AANJ type heel

specs are

Nut Width 42.3mm
Heel Width 58.6mm

Depth 1st Fret 19.4mm
Depth 12th Fret 21mm

Fingerboard Rad looks to be 16” ish but given it will need sanding before fretting I guess you could change that

It’s a bit rough

https://i.imgur.com/VB5JF51.jpg

https://i.imgur.com/VJiaETS.jpg

it’s been de fretted so will need re fret before you can use it and it will need sanding and a finish applied

https://i.imgur.com/hM3eGbH.jpg

https://i.imgur.com/NoIN9yk.jpg

https://i.imgur.com/EFfS5Ic.jpg

But could be made into something fairly classy I reckon !

£50 posted

any more pics or details please do shout

Cheers

mrkb · July 2022

Hi,
Do you know the weight of the strat body?

DrBob · July 2022

I don’t have a working scale hang on I’ll see what I can do

DrBob · July 2022

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh

mrkb · July 2022

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

DrBob · July 2022

mrkb said:

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

So 5g isn’t enough of a saving ? Kidding I’m kidding

mrkb · July 2022

DrBob said:

mrkb said:

DrBob said:

Bathroom scales are saying 2kg but I’m not sure how precise they are tbh

Ok thanks, was looking to replace a 2,05kg body on current partscaster as its too heavy - so doesnt work for me. GLWS.

So 5g isn’t enough of a saving ? Kidding I’m kidding

sure are - it would be 50g

DrBob · July 2022

Well there you go ! That’s a further 45g of weight saved !

dallcorp · July 2022

PM sent re neck.

dallcorp · July 2022

Strat neck that is

DrBob · July 2022

That’s Strat neck & pickups sold pending the usual !

DrBob · July 2022

Strat Neck, Pribora Pickups, Wilkinson Trem sold

DrBob · July 2022

Bump for a nice Strat body in an unusual finish with a classy pickguard !

daveyh · July 2022

What wood and finish is it?

DrBob · July 2022

daveyh said:

What wood and finish is it?

Now I knew this when I bought it. But that was 8 years ago. I’ve messaged the guy who I bought it from who I think did the finish, see if he can come up with anything

DrBob · July 2022

Right he thinks it was it was Oly White Nitro that he applied over a non grain filled swamp ash body

daveyh · July 2022

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

DrBob · July 2022

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth

robinbowes · July 2022

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth

I'm tempted by the body, but what do you mean by this?

R.

DrBob · July 2022

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth

I'm tempted by the body, but what do you mean by this?

R.

I’ll get a picture when I’m back home in a bit !

DrBob · July 2022

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth

I'm tempted by the body, but what do you mean by this?

R.

https://imgur.com/gallery/dD18igD

So as you can see. all six holes are drilled but they’re only drilled to a depth of 3mm so you would need to drill deeper to install the trem screws.

Also, I’ve just noticed, you would need to drill the two screws for the trem claw

robinbowes · July 2022

DrBob said:

robinbowes said:

DrBob said:

daveyh said:

This is extremely tempting but I was after an alder body. I shall be thinking hard on this

Full disclosure, I’ve just looked over it and the tremolo holes are only starter holes , You would have to drill them to depth

I'm tempted by the body, but what do you mean by this?

R.

https://imgur.com/gallery/dD18igD

So as you can see. all six holes are drilled but they’re only drilled to a depth of 3mm so you would need to drill deeper to install the trem screws.

Also, I’ve just noticed, you would need to drill the two screws for the trem claw

Ah, OK. That's not a problem.

Will DM you.

R.

DrBob · July 2022

All sold !

Howdy, Stranger!

Categories

In this Discussion

Become a Subscriber!

FS, Most of a nice Strat (GSP, GuitarBuild, Pribora, Wilkinson) + Ibanez-ish neck

Comments