Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused).
It looks like you're new here. If you want to get involved, click one of these buttons!
Subscribe to our Patreon, and get image uploads with no ads on the site!
This is a handmade overdrive pedal based on the Landgraff Dynamic Overdrive, a variation of the classic Tube Screamer circuit. The three way clipping switch changes from asymmetrical silicon clipping diodes, symmetrical clipping diodes (Red LEDs), and diode lift.
This pedal was built with quality components including a classic JRC4558DD opamp, quality Lumberg jacks, a Gorva Design 3pdt stomp switch, and Alpha pots. It is true bypass using the voodoo labs optical bypass system for a "click-less" bypass. The pedal was built in a 1590b (4.425" L x 2.382" W) sized enclosure.
This pedal was constructed by hand. I sourced the parts, drilled the holes and prepared the enclosure. I hand soldered all the components and wires. I use heat shrink and hot glue for additional durability.
The pedals I build do not include battery snaps and require a standard center negative 9 volt power supply.
Because of the tolerance / type of components, the accuracy of the schematics available, and how they're built, no clone will sound exactly like the original pedal.
Base theme by DesignModo & ported to Powered by Vanilla by Chris Ireland, modified by the "theFB" team.
Comments
https://www.thefretboard.co.uk/discussion/202071/nco
https://www.thefretboard.co.uk/discussion/202071/nco
https://www.thefretboard.co.uk/discussion/202071/nco
https://www.thefretboard.co.uk/discussion/202071/nco