Query failed: connection to localhost:9312 failed (errno=111, msg=Connection refused). WTB: Telecaster neck (CV, standard squier, unbranded etc) - Parts £ Discussions on The Fretboard
› ›
UNPLANNED DOWNTIME: 12th Oct 23:45

WTB: Telecaster neck (CV, standard squier, unbranded etc)

Creed_ClicksCreed_Clicks Frets: 1255
in Parts £
Before I go to the fleabay, thought I might check here first. Would like to go a bit higher quality that a bullet neck, so maybe a CV, or something. Unbranded etc...
0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter

Comments

  • paulnb57paulnb57 Frets: 2884
    edited April 2020
    @Creed_Clicks ;;
    OK lets try again, Ive had a scratch around and have there two jokers
    I have too many guitars already and these wont get used
    The top one was an ebay purchase years ago, it was used on an early project and is fine, but its been in storage for ages, it has an issue, the top e tuner hole was drilled 1mm oversize at the factory, 11mm instead of 10....wrap some masking tape round the body of the tuner where it goes through the hole and its fine, med jumbo ish, a bit of flame, heel truss rod adjustment, no nut, quite a thick poly finish, small cracks in the finish at tje tuner screw holes, not too bad a budget neck....
    30quid mailed

    Bottom one is by GSP Basses, is finished in thin Nitro, med jumbo, two way truss rod, Locking, staggered tuners
    100quid mailed...
    Stranger from another planet welcome to our hole - Just strap on your guitar and we'll play some rock 'n' roll

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • paulnb57paulnb57 Frets: 2884
    edited April 2020







    Stranger from another planet welcome to our hole - Just strap on your guitar and we'll play some rock 'n' roll

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • Creed_ClicksCreed_Clicks Frets: 1255
    @paulnb57 no pics, I see you edited the post from the one earlier?
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • paulnb57paulnb57 Frets: 2884
    edited April 2020
    @Creed_Clicks ;Yep Im a retard...Im on it!
    Stranger from another planet welcome to our hole - Just strap on your guitar and we'll play some rock 'n' roll

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • skinfreakskinfreak Frets: 199
    Justin case there is this one on fleabay; https://www.ebay.co.uk/itm/233544819296
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • lysanderlysander Frets: 570
    @paulnb57 would you mind measuring the nut width and thickness of the GSO neck ?
    Would be interested if it’s the wide / thin type
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • paulnb57paulnb57 Frets: 2884
    edited April 2020
    @lysander  neck width is just shy of 1.7 inches wide at the nut and about .980inch deep at first, twelfth and onward! Not wide n thin!
    Stranger from another planet welcome to our hole - Just strap on your guitar and we'll play some rock 'n' roll

    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
  • lysanderlysander Frets: 570
    Ok thanks for checking @paulnb57 !
    0reaction image LOL 0reaction image Wow! 0reaction image Wisdom · Share on Twitter
Sign In or Register to comment.